FRL 3000

Filters, regulators, lubricators, and piggybacks can be combined together to form combinations. They are typically strung together in the F+R+L arrangement (three-piece combo) and F/R+L (two-piece combo) arrangement, although other configurations are also used depending on application needs. ARO-Flo combination FRLs are easily assembled using modular spacer kits. Panel nuts not included with units. Must be ordered separately.

FRL 3000 Model Numbers

C38451-610, C38451-611, C38451-810, C38451-811, C38461-610, C38461-611, C38461-810, C38461-811.

Brochure

Filter 3000

ARO-Flo compressed air filters are designed to remove airborne solid and liquid contaminants. Filters can be ordered with different elements, including coalescing models which are capable of removing oil aerosols and particles down to 0.3 micron. Standard filters are sold with 5-micron elements; 40-micron elements can be purchased and installed separately.

Filter 3000 Model Numbers

F35451-410, F35451-411, F35451-420, F35451-421, F35452-310, F35452-311,F35452-321, F35452-410, F35452-411, F35452-420, F35452-421, F35461-410, F35461-411, F35461-420, F35461-421, F35462-310, F35462-311, F35462-320, F35462-321, F35462-410, F35462-411, F35462-420, F35462-421.

Brochure


Regulators 3000

Air line regulators provide controlled, consistent air pressure as required for specific pneumatic equipment connected to the air system. All ARO-Flo regulators are offered with a standard adjustment range of 0 – 140 psig (0 – 9.6 barg). Alternative spring ranges are offered for easy conversion to suit different requirements. Non-relieving regulators are offered for applications where the venting of downstream overpressure is undesirable

Regulators 3000 Model Numbers

R37451-100, R37451-120, R37451-200, R37451-220, R37451-300, R37451-320, R37451-400, R37451-600, R37451-620, R37461-100, R37461-120, R37461-200, R37461-300, R37461-320, R37461-400, R37461-600, R37461-620.

Brochure

Lubricators 3000

ARO-Flo mist-type lubricators help ensure that pneumatic devices receive the required lubrication to maintain peak performance, reduce wear, and prolong service life. They are designed to provide the correct amount of oil required for most general applications in a pneumatic system, delivering a constant ratio of oil to air flow. Precise oil feed adjustment sets the proper oil drip rate. Lubricators should be installed close to the downstream application to ensure effective distribution of oil.

Lubricators 3000 Model Numbers

L36451-110, L36451-120, L36461-110, L36461-120.

Brochure


Piggyback Filter Regulator

Filter-regulators, or “piggybacks,” combine the functions of both a filter and regulator. Piggybacks are compact and most effective when space is a constraint. Piggybacks can be ordered with different filter elements and can be modified with different springs, depending on the filtration and air regulating requirements.

Piggyback Filter Regulator 3000 Model Numbers

P39454-110, P39454-114, P39454-124, P39454-210, P39454-214, P39454-410, P39454-414, P39454-610, P39454-614, P39454-620, P39454-624, P39464-110, P39464-120, P39464-210, P39464-214, P39464-410, P39464-414, P39464-610, P39464-614, P39464-620.

Brochure